DIN1142 Malleable Wire Rope Clips Specification:

DIN1142 Malleable Galvanized Wire Rope Clip Description:

• It is very easy to produce and torque, commonly used in static bolted and rope fastening, such as electric power, communications line, band fastening, etc for critical applications.. Check out this article about: A Complete Guide to Wire Rope Clips
• The malleable wire cable clamp approximate failure load is 80%~90% of the cable’s breaking load
  **Malleable iron wire rope clips should only be used in non-critical applications**
• Wire rope clamp HS Code: 732690

How to install wire rope clips?

Commonly wire rope clamp installation is very simple, there’s a well-known saying can help you remember how to attach wire rope clips, that reads “never saddle a dead horse.” Just follow the recommendation ways:

• The dead-end of the wire rope (the end of the cut side) must be contacted with the U bolt, then the saddle should be on the live end.
• Keep three or more wire rope clips attached at the end of the wire rope dead end, space between each wire rope clip should be at least 6 times the wire rope diameter.
• Tighten the wire rope clip closest to the thimble eye loop as possible, and never start from the one farthest from eye separately first.
• You can see the correct and incorrect ways of installation from the following pictures and find how many wire rope clips to use at one wire rope loop.
• Check out this article for more about wire rope clamp installation.

Shipping and Payment Term:

• We generally ship cargos worldwide by sea. The goods will be in a shipping container when arriving at the port. You are responsible for picking up your shipment and customs clearance on your side.
• We do accept small, urgent orders that need to be shipped by air.
• We currently accept T/T & L/C.
• Please contact us if you have any questions about shipping or payment, we will be happy to assist you.

Light Duty Din1142 Malleable Wire Rope Clip capacity suit for the diameter rope from 5mm to 40mm and meet the requirements of EN BS 13411-5