Eye and Eye Turnbuckle Specification:

Key Features:

• Constructed with an open barrel design turnbuckle body and elongated eyes end fittings with reverse thread shanks for less stress on the end and for the safe connection points. We also have jaw and jaw turnbuckle for your option..
• Hot dipped galvanized add protection against rust and corrosion, drop forged, quenched and tempered, make them easily elongated to reduce stress on the eye and other rigging accessories to pass through, read this article: Surface Finish: 4 Common Types You Should Know
• HS Code: 732690

How to use a turnbuckle?

• Unscrew end fittings from the turnbuckle body until completely extended to the full take-up length.
• Connect end fittings on either end to desired securement point, for eye end and hook end fittings, simply loop it through whatever securement point it will be connected to, as for jaw end fitting, unscrew the bolt from the jaw, place the securement point between the clevis ears (thimble, eye bolt, etc), then place the bolt through, and screw it shut.
• Read this article for more about turnbuckle use knowledge.

Galvanized Double Eye Turnbuckle Packing:

Us type drop forged eye bolt turnbuckle packing: Sacks, Drums, Cartons, Gunny Bags Per Wooden Pallet Or Steel Pallet.
Specification And Marks Can Be Made According To Customer’s Requirements.

Forged Eye To Eye Turnbuckle Application:

Eye and eye galvanized turnbuckles are intended for straight-line pulls only or in-line applications not for lifting purposes. They have no moving and opening parts, designed for a shackle or quick link to go through on each eye end, then attached a wire rope sling or other approved rigging component. Check out this article for more about turnbuckle hardware: The Complete Guide You Should Know About Turnbuckle Hardware

Shipping and Payment Term:

• We generally ship cargos worldwide by sea. The goods will be in a shipping container when arriving at the port. You are responsible for picking up your shipment and customs clearance on your side.
• We do accept small, urgent orders that need to be shipped by air.
• We currently accept T/T & L/C.
• Please contact us if you have any questions about shipping or payment, we will be happy to assist you.

US Type eye and eye turnbuckle size chart is from 1/4″x4″ to 2 3/4″x24″ which meet the requirements of ASTM F-1145 (formerly Federal Specification FF-791B) and ASME B30.26.